Reason : Dust on the surface, because the environment around is filled with dust. Solutions : Used normal glue paper to apply the location with dust softly, make sure that no dust will stay, and then apply it again.

Reason : Laminating too fast so the screen protector didn’t match the screen well. Solution : Peel off the films again and make sure that the bubbles can get in touch with the atmosphere from outside, and then apply it again.

Step 1: wipe clean the screen with the Moist Wipes; and then wipe dry it with cleaning cloth; capture dust with Electrostatic dust stick in the end. Step 2: with the adhesive side downwards and be careful of your finger, peel the film of No.1. Step 3: Use your hand or card squeeze out the bubbles from the LCD screen. Step 4: Remove the released film thought No.2 film, done.

FAQs | POWELL

Q: Why laminating badly?

Reason : For curved edge mobile for example iPhone 6 and Note 4, it is quite hard to positioning is correctly. Solutions : Peel off it again and position it to the mobile`s edge more precise, then apply it again.

Q: Can I clean the adhesive side of my screen protector?

You can use the dust removal stickers or scotch tape to remove any dust or lint on the back of the protector. However, when doing this you run the risk of cracking the protector, or getting more debris on the adhesive side.

Q: Can I return or exchange my product

Yes! POWELL offers all customers a 100% no questions asked money back guarantee ( Check the terms ).

Q: Can I use glass screen protector with a case?

yes, you can. As long as the case does not have a plastic see through cover on it. The plastic see through covers will adhere themselves to the glass screen protector if exposed to heat. Leather or other material cases are just fine. Some cases will discolor the protectors because the material is porous and will absorb the dye in the leather of material cases. We recommend a silicone type case that is not really tight fitting to go with the glass screen protector.